Mould was growing through the insulation in an aircon return air cavity in a North Bondi apartment. We contained the area under negative air, removed the insulation and HEPA vacuumed the cavity.

An aircon drip tray leaked into the ceiling of a Maroubra apartment and mould was growing inside the hatch. We set up containment, stripped out the wet plaster and HEPA vacuumed every surface with slow, overlapping passes.

A slow leak from a copper hot water pipe left mould on the subfloor framing of a Matraville brick veneer home. Inspection, remediation and structural drying in 5 days. $8,000 + GST.

A leaking shower with a failed waterproofing membrane left mould in a Hazelbrook subfloor. We cleaned and encapsulated it in two days, ready for the bathroom rebuild. $4,500 + GST.

A water main leak inside the wall cavity caused mould behind the plasterboard in a Balmain bedroom. Strip-out, new framing, independent clearance, then a full rebuild in 10 days for $7,500 + GST.

A roof leak caused mould in a Croydon master bedroom. We stripped the plasterboard, replaced bottom plates, waited for independent clearance, then rebuilt in 8 days for $6,000 including GST.

Water damage led to Chaetomium mould in a Darlinghurst apartment. Day one of the job: containment, decontamination chambers and negative air, set up under IICRC S520.

A precautionary Condition 2 clean in a Kirrawee apartment after water damage: 500 CFM HEPA air scrubbers in every room, HEPA sandwich vacuuming and an Actichem Thymox wipe. $1,800 + GST.

A leaking box gutter caused water damage and mould in a Crows Nest home. Behind the plaster we found termites. Here's why we stopped work and what happens next.

Condition 2 means settled mould spores, not active growth. Learn how IICRC S520 defines it and watch our Condition 2 surface cleans in Willoughby, Mosman and Rose Bay.

A slow pipe leak behind a wall and a cracked roof tile kept a Cronulla wall wet until mould grew inside it. Here's why we stripped it out and what to watch for.

An ensuite leak spread mould into a Parramatta linen cupboard. See how we found the moisture, removed the mould and rebuilt it in 4 days for $4,000 + GST.

A roof leak into a Wollstonecraft high-rise unit: how we used the FLIR MR277 and Protimeter MMS2 to find and measure hidden moisture, and what the readings meant.

Subfloor mould remediation in Wollstonecraft after a bathroom leak: sanding, Actichem Percide, HEPA cleaning and drying, plus the full PPE our team wears.

Our mould inspection in Lane Cove found rising damp, high indoor humidity and mould around the windows. See how we used air sampling, tape lifts, moisture mapping and thermal imaging.

A failed planter box leaked into a Lane Cove unit's lounge room. See how we removed the mould and dried the wall with HEPA filtration and Drymatic heat drying.

A failed bathroom waterproofing system caused water damage and mould in a rendered wall in Campsie. See how we removed the paint, HEPA-cleaned the mould and set up Drymatic targeted heat drying.

AAA Mould Removal was on site at Nepean Hospital within 60 minutes for an emergency water damage job. See our IICRC S500 process: extraction, moisture mapping and drying.

By Michael Nguyen | Indoor Environmental Professional (IEP) | IICRC WRT, AMRT, ASD (69486970) | Mould Testing Technician (NAT10913005) | Licensed Builder NSW 392154C (Supervisor, KBL+RENO) Water damage doesn't always start with a burst pipe or overflowing bathroom. Sometimes, moisture enters a building from the outside, gradually damaging internal walls, plasterboard, insulation and structural components. During a recent water damage remediation project in Strathfield, Sydney

By Michael Nguyen | Indoor Environmental Professional (IEP) | IICRC WRT, AMRT, ASD (69486970) | Mould Testing Technician (NAT10913005) | Licensed Builder NSW 392154C (Supervisor, KBL+RENO) A recent mould remediation project in Manly, NSW highlighted a common but often overlooked issue in Sydney homes: hidden mould contamination within roof cavities caused by ongoing roof leaks. Following reports of musty odours and indoor air quality concerns, AAA Mould Removal conducted a co